Hover mouse over dock photo to CLICK & BUY dock components

Click to expand floating dock parts for sale below

 


See more below

Our products are either shipped UPS Ground, Freight, or LTL. We do not know which shipping method would be least expensive, until we review the parts ordered and their quantity. If you wish, you can contact a customer service representative for an accurate total (including shipping) and from there the order can be placed. Though this process takes more time, it is done to ensure absolute accuracy. We appreciate your business, and we strive to make every sale as efficient as possible. Thank you!

FYI…some of our photos of hinge plates below show the old hinge tab from 1979 with the corners cut off. Our new hinge tabs are the same size only have a rounded outside edge as shown in the illustrations.

 

Floating Dock Hardware Online Store

Dock Float 10"x24"x36" Air Filled "Drag On Float"  #2301
Dock Float 10″x24″x36″ Air Filled “Drag On Float” #2301

10″x24″x36″ Air Filled Drag On Float
Skid Board attachment optional with the use of long carriage bolts up through openings in the float.
A threaded vent hole is installed for floats that ship to high altitudes to prevent expanding. Plug will need to be installed before use.
For orders of 6 or more, you may want to call for a bulk shipping rate. Pallet shipping needs to go to a commercial location with a fork lift or loading dock unless you pay extra for a delivery truck with a lift gate. Shipping locations need to be trailer truck accessible. (no camp roads)
Otherwise, UPS ground is the best shipping method for these items.

not rated $115.00 Add to cart
Dock Float 10"x24"x48" Air Filled "Drag On Float"  #2302
Dock Float 10″x24″x48″ Air Filled “Drag On Float” #2302

10″x24″x48″ Air Filled Drag On Float
Skid Board attachment optional with the use of long carriage bolts up through openings in the float.
A threaded vent hole is installed for floats that ship to high altitudes to prevent expanding. The plug needs to be installed before use.
For orders of 6 or more, you may want to call for a bulk shipping rate. Pallet shipping needs to go to a commercial location with a fork lift or loading dock unless you pay extra for a delivery truck with a lift gate. Shipping locations need to be trailer truck accessible. (no camp roads)
Otherwise, UPS ground is the best shipping method for these items.

not rated $128.00 Add to cart
Dock Float 12"x24"x36" Foam Filled #2304
Dock Float 12″x24″x36″ Foam Filled #2304

Rotation Molded Polyethylene Dock Floatation with Expanded Poly Styrene Foam Filling.

Buoyancy 327 lb in Fresh water

A vent plug is included and needs to be installed before use.
For orders of 6 or more, you may want to call for a bulk shipping rate. Pallet shipping needs to go to a commercial location with a fork lift or loading dock unless you pay extra for a delivery truck with a lift gate. Shipping locations need to be trailer truck accessible. (no camp roads)
Otherwise, UPS ground is the best shipping method for these items.

not rated $117.00 Add to cart
Dock Float 12"x24"x48" Foam Filled #2305
Dock Float 12″x24″x48″ Foam Filled #2305

Rotation Molded Polyethylene Dock Floatation with Expanded Poly Styrene Foam Filling.
Buoyancy 434 lbs in fresh water
A vent plug is included and needs to be installed before use.
For orders of 6 or more, you may want to call for a bulk shipping rate. Pallet shipping needs to go to a commercial location with a fork lift or loading dock unless you pay extra for a delivery truck with a lift gate. Shipping locations need to be trailer truck accessible. (no camp roads)
Otherwise, UPS ground is the best shipping method for these items.

not rated $141.50 Add to cart
Shore Anchor Bracket #6014
Shore Anchor Bracket #6014

Fits 1.5″ schedule 40 Pipe
Galvanized Steel with a set screw included

not rated $27.50 Add to cart
T-Hinge Plate #6008
T-Hinge Plate #6008

This plate is used when a floating dock is connected into the side of another where there is no corner. This plate mounts to the side of the dock and the outer corners where the stringer ends needs to be … Read More

not rated $20.00 Add to cart
Reinforced Hinge Plate #6010
Reinforced Hinge Plate #6010

1/4″ Galvanized Steel
4″ Tall
10″ Long
Tab is 4 3/8″

not rated $28.00 Add to cart
Dock Hinge Bolt with Nylock Nut Zinc (8 Pack) #9092
Dock Hinge Bolt with Nylock Nut Zinc (8 Pack) #9092

These are used to join floating dock sections. Tighten them up all the way into the nylock portion of the nut. To prevent noise, do not tighten the plates together. (8 Per Pack)

not rated $36.00 Add to cart
Dock Hinge Nylon Spacer (12 Pack) #2558P
Dock Hinge Nylon Spacer (12 Pack) #2558P

Nylon Spacer to help absorb sound between hinge plates. (12 Per Pack)

not rated $15.00 Add to cart
Dock Hinge Nylock Nut 3/4" Zinc Plated (12 Pack) #2503
not rated $18.00 Add to cart
Corner Iron 90º #6027A
Corner Iron 90º #6027A

Corner Iron reinforces the inside corner of the dock frame. Mostly needed on a section that is resting on the J-Brackets for stationary docks or to reinforce corners and stringers on floating docks that are under a lot of torque due … Read More

not rated $7.75 Add to cart
Reinforced T-Hinge Plate #6011
Reinforced T-Hinge Plate #6011

1/4″ Galvanized Steel
4″ Tall

not rated $43.00 Add to cart
Corner Stiffener 90º #6027
Corner Stiffener 90º #6027

1/4″ Galvanized Steel
4 3/4″ each side

4″ tall

not rated $15.00 Add to cart
3/8 Eye-Eye Swivel #2209
3/8 Eye-Eye Swivel #2209

3/8″ Galvanized Eye-Eye Swivel

not rated $16.50 Add to cart
Chain 3/8 Galvanized (1' Linier foot) #1268
Chain 3/8 Galvanized (1′ Linier foot) #1268

The order quantity will equal the length of chain provided. We have a 60′ limit for the UPS shipping calculator. Please do not exceed the 60′ in your internet order. If you need the chain cut in smaller lengths (example: … Read More

not rated $5.75 Add to cart
Shackle 3/8" Galvanized (6 Pack) #2204
Shackle 3/8″ Galvanized (6 Pack) #2204

Shackles can be used to connect the 3/8″ chain to the anchor or anchor plate. (6 Per Pack)

not rated $33.00 Add to cart
Anchor Plate Keyhole #6013A
Anchor Plate Keyhole #6013A

Anchor Chain Holder

not rated $28.00 Add to cart
Anchor Rod Galvanized for Concrete Block #6029
Anchor Rod Galvanized for Concrete Block #6029

You can buy our concrete anchors at our location in Naples Maine or you may have them shipped on a trailer truck with your entire dock but shipping them alone is very costly. The good news is…you can make your … Read More

not rated $27.00 Add to cart
Post Guide #6097
Post Guide #6097

The “post guide” is used to go around a pipe that is driven next to the floating dock. This bolts to the frame and helps hold it in position.

not rated $24.75 Add to cart
Post Guide Long #6090
Post Guide Long #6090

Long Post Guide: Allows water level more fluctuation than the regular post guide. As water level changes, the distance too and from shore changes. Use 1.5″ schedule 40 Galvanized Pipe driven through the opening. When water is high, pipe would go … Read More

not rated $72.00 Add to cart
Pipe Auger (2 Pack) #2195
Pipe Auger (2 Pack) #2195

Fits 1.5″ schedule 40 Pipe
Cast Steel Painted

not rated $60.00 Add to cart
Helix Anchor #2199
not rated $35.00 Add to cart
Torsion Bar End Socket #4155
Torsion Bar End Socket #4155

In a marina, you have boat slips. The docks between boats are called finger docks. These dock sections are often very twisty at the end. If they are made out of wood, the boards flex enough to allow them to … Read More

not rated $56.50 Add to cart

Floating Dock Accessories

Boat Dock Bumper “Guardian” #2254
Boat Dock Bumper “Guardian” #2254

Universal Dock Bumper Mounts to docks for vertical or horizontal use.

not rated $67.25 Add to cart
Dock Dots 4 Pack #2002
Dock Dots 4 Pack #2002

Drill  a 1 3/8″ Hole and set into deck Solar Dock Dots

not rated $56.50 Add to cart
Solar Deck Light #2000
Solar Deck Light #2000

Install options: Screws Bolts Silicone Glue  

not rated $41.75 Add to cart
Dock Cleat 6" (Galvanized) #2256
Dock Cleat 6″ (Galvanized) #2256

6″ Galvanized Dock Cleat

not rated $6.25 Add to cart
 Dock Cleat 10" (Galvanized) 2 Pack #2259
Dock Cleat 10″ (Galvanized) 2 Pack #2259

10″ Galvanized Dock Cleat (2 Pack) Note: 10″ Cleat Bolt Kit #9263 sold separately.  

not rated $31.00 Add to cart
Dock Cleat Stiffener for 8" or 10" Galvanized Cleats (2 Pack) #4060
Dock Cleat Stiffener for 8″ or 10″ Galvanized Cleats (2 Pack) #4060

Aluminum Backer Plate for 8″ and 10″ Galvanized Dock Cleats. Bolt this through the under side of the dock frame and the deck board for a much more durable cleat attachment. (2 Per Pack)

not rated $20.50 Add to cart
Folding Cleat #2275 (SOLD OUT)
Folding Cleat #2275

Folding Cleat (Black) The Cleat is not exposed when not in use The side of the cleat are angled to prevent toe stubbing and tripping Nylon Composite is rated for 27,000 pounds per square inch tensile strength Will not corrode … Read More

not rated $33.25 Add to cart
8" Nylon Cleat (4 Pack) #2257
8″ Nylon Cleat (4 Pack) #2257

Black Plastic Cleat (4 Pack) Each Cleat Requires two 1/4″ Bolts

not rated $37.00 Add to cart
Dock Cleat 6" Aluminum #2256A
Dock Cleat 6″ Aluminum #2256A

Ideal for small boats and docks. Aluminum construction Requires 1.4″ screws or bolts

not rated $22.00 Add to cart
Shore Anchor Bracket #6014
Shore Anchor Bracket #6014

Fits 1.5″ schedule 40 Pipe
Galvanized Steel with a set screw included

not rated $27.50 Add to cart
Reinforced Hinge Plate #6010
Reinforced Hinge Plate #6010

1/4″ Galvanized Steel
4″ Tall
10″ Long
Tab is 4 3/8″

not rated $28.00 Add to cart
Dock Hinge Bolt with Nylock Nut Zinc (8 Pack) #9092
Dock Hinge Bolt with Nylock Nut Zinc (8 Pack) #9092

These are used to join floating dock sections. Tighten them up all the way into the nylock portion of the nut. To prevent noise, do not tighten the plates together. (8 Per Pack)

not rated $36.00 Add to cart
Dock Hinge Nylon Spacer (12 Pack) #2558P
Dock Hinge Nylon Spacer (12 Pack) #2558P

Nylon Spacer to help absorb sound between hinge plates. (12 Per Pack)

not rated $15.00 Add to cart
 Dock Cleat 8" Galvanized (2 Pack) #2258
Dock Cleat 8″ Galvanized (2 Pack) #2258

8″ Galvanized Dock Cleat (2 Pack)  

not rated $19.50 Add to cart
Corner Bumper White #2250
Corner Bumper White #2250

White Vinyl Bumper for Dock Corner. 8.5″x8.5″ Inside. Attaches with Nails or screws on top lip and bottom edge.

not rated $29.00 Add to cart
Edge Guard Dock Bumper Strip 6′ (2 Pack) #2240
Edge Guard Dock Bumper Strip 6′ (2 Pack) #2240

Vinyl Dock bumper strip that can be nailed or screwed on. Top lip covers 1″ of deck while side edge covers 3″ of edge. Padding/bubble, is 1″ thick in the middle and 2-1/4″ tall. Wood background in photo is not … Read More

not rated $64.00 Add to cart
C-Shape Bumper Strip 6′ (2 Pack) #2238
C-Shape Bumper Strip 6′ (2 Pack) #2238

6′ Length of Vinyl c-shape bumper. This can be nailed on or screwed on by the flat area on each side of the C. (Two 6′ strips per pack) See the image gallery featuring this product below.

not rated $64.00 Add to cart
Mooring Whip SE-162 #2152
Mooring Whip SE-162 #2152

Fiberglass mooring whip with cast aluminum base and whip lines.

not rated $848.75 Add to cart
Mooring Whip SW-142 #2151
Mooring Whip SW-142 #2151

Fiberglass mooring whip with cast aluminum base and whip lines.

not rated $790.75 Add to cart
Mooring Whips SE-100 #2150
Mooring Whips SE-100 #2150

Mooring whip set for average 18′ Boat

not rated $450.75 Add to cart
Helix Anchor #2199
not rated $35.00 Add to cart
Telescoping Boat Hook #2193
Telescoping Boat Hook #2193

Telescoping Boat Hook for Reaching out of a Boat

not rated $44.00 Add to cart