Dock Float 10"x24"x36" Air Filled "Drag On Float"  #2301
Dock Float 10″x24″x36″ Air Filled “Drag On Float” #2301

10″x24″x36″ Air Filled Drag On Float
Skid Board attachment optional with the use of long carriage bolts up through openings in the float.
A threaded vent hole is installed for floats that ship to high altitudes to prevent expanding. Plug will need to be installed before use.
For orders of 6 or more, you may want to call for a bulk shipping rate. Pallet shipping needs to go to a commercial location with a fork lift or loading dock unless you pay extra for a delivery truck with a lift gate. Shipping locations need to be trailer truck accessible. (no camp roads)
Otherwise, UPS ground is the best shipping method for these items.

not rated $111.00 Add to cart
Dock Float 10"x24"x48" Air Filled "Drag On Float"  #2302
Dock Float 10″x24″x48″ Air Filled “Drag On Float” #2302

10″x24″x48″ Air Filled Drag On Float
Skid Board attachment optional with the use of long carriage bolts up through openings in the float.
A threaded vent hole is installed for floats that ship to high altitudes to prevent expanding. The plug needs to be installed before use.
For orders of 6 or more, you may want to call for a bulk shipping rate. Pallet shipping needs to go to a commercial location with a fork lift or loading dock unless you pay extra for a delivery truck with a lift gate. Shipping locations need to be trailer truck accessible. (no camp roads)
Otherwise, UPS ground is the best shipping method for these items.

not rated $123.50 Add to cart
4x4 Post Driving Cap #7101
4×4 Post Driving Cap #7101

This is used to provide a flat surface to pound a 4×4 into the ground with a sledge hammer. The 4×4 should be pointed on the bottom. 1″ thick Steel  on top and 3/16″ wall thickness on the sleeve. This … Read More

not rated $71.00 Add to cart
Pipe Foot (2 Pack) #4180
Pipe Foot (2 Pack) #4180

Dock Pipe Leg Foot with a set screw for vertical adjustment. Pipe can pass through the foot into the ground while the foot prevents the leg from pushing deeper when weight is added. Dock feet are not always needed on rocky lake bottoms but more commonly used on mud and sand. Foot plate size is 9.5″ x 9.5″

not rated $65.00 Add to cart
4x4 Post Winch #9003B
4×4 Post Winch #9003B

This Winch mounts to a finish cut 4×4 post to be used as a jack pole when raising or lowering dock sections. The hook provided goes on the under side of the 2×6 frame. The post should have a foot on the bottom to stabilize the … Read More

not rated $136.00 Add to cart
Dock Handle #7156
Dock Handle #7156

Painted Steel

not rated $17.50 Add to cart
Driving Cap #7073
Driving Cap #7073

Painted Steel Driving Cap for 1.5″ schedule 40 Pipe.

not rated $21.00 Add to cart
Float Handle #7156A
Float Handle #7156A

Hooks under the outside 2×6 stringer for lifting

not rated $15.25 Add to cart
Jack Pole Extension #4000
Jack Pole Extension #4000

For Installing Stationary Dock Sections with the leveling winch and pipe foot.
Marine Grade Aluminum with four stainless set screws.

not rated $32.00 Add to cart
Leveling Winch #9003
Leveling Winch #9003

Winch mounts to 1.5″ schedule 40 Pipe with a foot on the base. This is used to jack the dock sections up and down during installation and leveling adjustments to sections of the dock as water levels may fluctuate. There … Read More

not rated $120.00 Add to cart
Pipe Puller #4154
Pipe Puller #4154

Fits on 1.5″ schedule 40 Pipe. Great for twisting  pipe to get it out of the ground if stuck. This is also used to screw in the pipe that has an auger on the end. Works Great with our Dock … Read More

not rated $54.50 Add to cart
Super Driving Cap #7100
Super Driving Cap #7100

  Use this to provide a flat surface for pounding the dock legs in with a sledge hammer. This is a wear part and expected to wear out after long use. The cap absorbs the blow from a sledge hammer … Read More

not rated $71.00 Add to cart