1.5″ Schedule 40 Galvanized Pipe (Curbside Pickup Only)
The actual measurement from outside edges is 1-7/8″ or 1.9.” However, it is known as “inch and a half schedule 40 Galvanized Pipe”. This is available at most hardware and plumbing stores. We additionally offer it for curbside pickup at … Read More
Chain per foot – Increase quantity for chain length. (Curbside Pickup Only)
Galvanized Chain by the foot. Enter the number amount for the quantity that equals your length desired. This length will be cut for you and ready for curbside pickup once you arrange a time you will arrive. Curbside Pickup Only … Read More
Concrete Anchor 285 lb #Concrete 9029 (Curbside pickup Only)
One Concrete Anchor with Galvanized anchor rod inside concrete to attach anchor chain. Approximately 285 lb.
Mooring Snubber
Provide elasticity to your dock line with the mooring snubber.
Mushroom Anchor (Curbside Pickup Only)
These work best in deep water where they can lay on their side and hook into the soil. When attached to our concrete anchors they will help limit the ability for concrete anchors to slide on slippery mud when the … Read More
1.5″ Schedule 40 Galvanized Pipe (Curbside Pickup Only) – 10′ 6″
Pipe Length: 10′ 6″
Chain per foot – Increase quantity for chain length. (Curbside Pickup Only) – 1/2″
Chain Diameter: 1/2″
Float Air Filled Dock Floatation (Drag-On Float) – 10″x24″x48″
Size: 10″x24″x48″
Float Foam Filled Dock Floatation (PermaFloat) – 12″x24″x36″
Size: 12″x24″x36″
Reinforced Hinge Plate #6010
1/4″ Galvanized Steel
4″ Tall
10″ Long
Tab is 4 3/8″
1.5″ Schedule 40 Galvanized Pipe (Curbside Pickup Only) – 21′
Pipe Length: 21′
Chain per foot – Increase quantity for chain length. (Curbside Pickup Only) – 3/8″
Chain Diameter: 3/8″
Float Air Filled Dock Floatation (Drag-On Float)
Air Filled Drag On Float
Skid Board attachment optional with the use of long carriage bolts up through openings in the float.
A threaded vent hole is installed for floats that ship to high altitudes to prevent expanding. The plug needs to be installed before use.
Contact us for a freight quote on this item.
Float Air Filled Dock Floatation (Drag-On Float) – 10″x24″x36″
Size: 10″x24″x36″
Float Foam Filled Dock Floatation (PermaFloat) – 12″x24″x48″
Size: 12″x24″x48″
Stainless Steel Fireman’s Snap #2267
Stainless Steel Fireman’s Snap for Mooring hook up.
T-Hinge Plate #6008
This plate is used when a floating dock is connected into the side of another where there is no corner. This plate mounts to the side of the dock and the outer corners where the stringer ends needs to be … Read More
1.5″ Schedule 40 Galvanized Pipe (Curbside Pickup Only) – 5′ 3″
Pipe Length: 5′ 3″
Chain per foot – Increase quantity for chain length. (Curbside Pickup Only) – 5/16″
Chain Diameter: 5/16″
Float Foam Filled Dock Floatation (PermaFloat)
Rotation Molded Polyethylene Dock Floatation with Expanded Poly Styrene Foam Filling.
Buoyancy 434 lbs in fresh water
A vent plug is included and needs to be installed before use.
Contact us for a freight quote on this item.
Shackles – Galvanized – Single Shackle 1/2″
Diameter: Single Shackle 1/2″
Short L Hinge Plate #6007
Short L Hinge plate is for joining floating docks together. The plate works similar to the T-Hinge plate however may have a bolt pattern that works better if framing or hardware interferes with mounting bolt locations. Corner Irons should be … Read More
1.5″ Schedule 40 Galvanized Pipe (Curbside Pickup Only) – 7′
Pipe Length: 7′
Corner Bumper White #2250
White Vinyl Bumper for Dock Corner. 8.5″x8.5″ Inside. Attaches with Nails or screws on top lip and bottom edge.
Guardian Bumper with Horizontal Snap-On for Dura-LITE™ #9253
This Guardian Bumper snaps on to the Dura-LITE™ Aluminum Dock Frame using the groove on top and track beneath. The extruded clips on the back of the bumper fit when snapped on the side of the dock frame. Dock … Read More
Shackles – Galvanized
Galvanized Shackle
Shackles – Galvanized – Single Shackle 5/8″
Diameter: Single Shackle 5/8″
Shore Anchor Bracket #6014
Fits 1.5″ schedule 40 Pipe
Galvanized Steel with a set screw included
Dock Float Attachment Kit 4 Lags #9275-4 (for the 3′ Drag On Float)
Use these lags to attach the 3′ Drag On floats to a wood frame dock. Use the large washers against the plastic flange.
Dock Float Attachment Kit 6 Lag #9275-6 (for the 4′ Drag On Float)
Use these lags to attach the 4′ Drag On floats to a wood frame dock. Use the large washers against the plastic flange.
Dock Float Attachment Kit (6 Lags for Perma Floats) #9278-6
Use these lags to attach the foam filled floats to a wood frame dock. Use the large washers against the plastic flange.
Dock Hinge Bolt with Nylock Nut Zinc (8 Pack) #9092
This bolt and nut is used to join floating dock sections. Tighten them up all the way into the nylock portion of the nut. To prevent noise, do not tighten the hinge plates together. (8 Per Pack)
Dock Hinge Nylon Spacer (12 Pack) #2558P
Nylon Spacer to help absorb sound between hinge plates. (12 Per Pack)
Bolt Kit 3/8″ Carriage #9280 (6 Count)
Six Galvanized Carriage Bolts Nuts and Washers 3/8″ x 2.5″
Corner Iron 90º #6027A
Corner Iron reinforces the inside corner of the dock frame. Mostly needed on a section that is resting on the J-Brackets for stationary docks or to reinforce corners and stringers on floating docks that are under a lot of torque due … Read More
Solar Dock Light 2 Pack #2009
Mounts on: 1-5/8″ 1-7/8″ 2″ 2-3/8″ 3-1/4″ Flat Surfaces Solar Charges AA Battery
Dock Dots 4 Pack #2002
Drill a 1 3/8″ Hole and set into deck Solar Dock Dots
Dock Ladder Aluminum (20º Slanted) # 9079DL (With Dura-LITE™ Bolt Kit) For Dura-LITE™ Dock Frame only
Aluminum Swim Ladder
Standard Mounting Bolts and instructions included.
Click image for expanded view.
Dock Ladder Aluminum “Vertical” #9078DL (With Dura-LITE™ Bolt Kit) For Dura-LITE™ Dock Frame only
Aluminum Swim Ladder
Standard Mounting Bolts and instructions included.
Click image for expanded view.
Dock Ladder Aluminum “Vertical” 5 Steps #9078DL-5 (With Bolt Kit) For Dura-LITE™ Dock Frame only
Our deepest reaching Aluminum Swim Ladder.
Standard Mounting Bolts and instructions included.
Carriage Bolt Galvanized 1/2″ Skid board attachment bolts (6 Pack)
Use two bolts when attaching a skid board to a 3′ Drag-On Float or three when attaching to a 4′ Drag-On Float. Check sizes for suggested skid board thickness.
Corner Stiffener 90º #6027
1/4″ Galvanized Steel
4 3/4″ each side
4″ tall
Post Guide #6097
The “post guide” is used to go around a pipe that is driven next to the floating dock. This bolts to the frame and helps hold it in position.
Post Guide Long #6090
Long Post Guide: Allows water level more fluctuation than the regular post guide. As water level changes, the distance to and from shore changes. Use 1.5″ schedule 40 Galvanized Pipe driven through the opening. When water is high, pipe would go … Read More
Torsion Bar End Socket #4155
In a marina, you have boat slips. The docks between boats are called finger docks. These dock sections are often very twisty at the end. If they are made out of wood, the boards flex enough they feel tipsy. The … Read More