$98.00
Marine Grade Aluminum
Brace clamps are used to attach the aluminum braces to the 4×4 posts. The Brace connects under the hex nut.
These braces can cross diagonally between the frame and the leg or from one leg to another.
The clamps allow height adjustments to the braces.
(4 Pack)
| Weight | 4 lbs |
|---|---|
| Dimensions | 12 × 9 × 6 in |
Only logged in customers who have purchased this product may leave a review.
Marine Grade Aluminum
10″ Long
4.5″ Tall
Holes are 3/4″ in from edge & 2 3/4″ from base
Requires 3/8″ Carriage Bolts for mounting
Six Galvanized Carriage Bolts Nuts and Washers 3/8″ x 2.5″
Corner Iron reinforces the inside corner of the dock frame. Mostly needed on a section that is resting on the J-Brackets for stationary docks or to reinforce corners and stringers on floating docks that are under a lot of torque due … Read More
Connect stationary dock sections with these brackets. The Bolt provided is to clamp the resting section on the J Bracket. The diagonal shaped bolt holes allow height adjustment up to one inch between sections as some lumber varies in size. … Read More
Marine grade aluminum
Requires two 3/8 bolts
This is a foot that mounts to the lower end of a 4×4 post leg. The post can be pointed on the base and pounded into the ground until the plate meets the surface.
Reviews
There are no reviews yet.