$42.00
Anchor Chain Holder
This 1/4″ Galvanized Steel Plate has a chain slot for anchor chain connection that can be adjusted in length. (AKA chain retainer)
It fit’s 3/8″ and 5/16″ Chain.
There are four 3/8″ bolts required for attachment of the plate.
Install this plate with the slot pointing down. The chain link will be held in the slot and can be pulled through the round part for adjustment.
| Weight | 3 lbs |
|---|---|
| Dimensions | 10 × 4 × 4 in |
Only logged in customers who have purchased this product may leave a review.
Air Filled Drag On Float
Skid Board attachment optional with the use of long carriage bolts up through openings in the float.
A threaded vent hole is installed for floats that ship to high altitudes to prevent expanding. The plug needs to be installed before use.
Contact us for a freight quote on this item.
Short L Hinge plate is for joining floating docks together. The plate works similar to the T-Hinge plate however may have a bolt pattern that works better if framing or hardware interferes with mounting bolt locations. Corner Irons should be … Read More
Use two bolts when attaching a skid board to a 3′ Drag-On Float or three when attaching to a 4′ Drag-On Float. Check sizes for suggested skid board thickness.
In a marina, you have boat slips. The docks between boats are called finger docks. These dock sections are often very twisty at the end. If they are made out of wood, the boards flex enough they feel tipsy. The … Read More
This plate is used when a floating dock is connected into the side of another where there is no corner. This plate mounts to the side of the dock and the outer corners where the stringer ends needs to be … Read More
This bolt and nut is used to join floating dock sections. Tighten them up all the way into the nylock portion of the nut. To prevent noise, do not tighten the hinge plates together. (8 Per Pack)
Long Post Guide: Allows water level more fluctuation than the regular post guide. As water level changes, the distance to and from shore changes. Use 1.5″ schedule 40 Galvanized Pipe driven through the opening. When water is high, pipe would go … Read More
Use these lags to attach the 4′ Drag On floats to a wood frame dock. Use the large washers against the plastic flange.
Reviews
There are no reviews yet.