$76.25
Bolts to a wood dock frame and fits 1 7/8″ OD Pipe. (Schedule 40 Galvanized Pipe)
Flip upside down for opposite side of dock.
To avoid confusion when buying pipe that fits in this dock part “4O5O”, the industry standard calls the pipe size as 1.5″ schedule 40 but the O.D. is actually 1 7/8″.
This dock hardware was used on Maine Cabin Masters season 3 Moose Pond Purple Twister Camp
| Weight | 3 lbs |
|---|---|
| Dimensions | 13 × 13 × 7 in |
Only logged in customers who have purchased this product may leave a review.
Connect stationary dock sections with these brackets. The Bolt provided is to clamp the resting section on the J Bracket. The diagonal shaped bolt holes allow height adjustment up to one inch between sections as some lumber varies in size. … Read More
Marine grade aluminum
Use two 3/8″ carriage bolts.
4.5″ tall
Corner Iron reinforces the inside corner of the dock frame. Mostly needed on a section that is resting on the J-Brackets for stationary docks or to reinforce corners and stringers on floating docks that are under a lot of torque due … Read More
Marine Grade Aluminum
Requires four 3/8″ carriage bolts
Fits 1.5″ schedule 40 Pipe
Dock Pipe Leg Foot with a set screw for vertical adjustment. Pipe can pass through the foot into the ground while the foot prevents the leg from pushing deeper when weight is added. Dock feet are not always needed on rocky lake bottoms but more commonly used on mud and sand. Foot plate size is 9.5″ x 9.5″
Reviews
There are no reviews yet.