Description
Reinforces the corner of the 2×6 frame.
Requires four 3/8″ carriage bolts
This can be mounted inside or outside the 2×6 dock frame.
Corner Stiffener 90º #6027
$23.50
1/4″ Galvanized Steel
4 3/4″ each side
4″ tall
Additional information
| Weight | 3 lbs |
|---|---|
| Dimensions | 10 × 4 × 4 in |
Only logged in customers who have purchased this product may leave a review.
Related Products
Float Air Filled Dock Floatation (Drag-On Float)
Air Filled Drag On Float
Skid Board attachment optional with the use of long carriage bolts up through openings in the float.
A threaded vent hole is installed for floats that ship to high altitudes to prevent expanding. The plug needs to be installed before use.
Contact us for a freight quote on this item.
Bolt Kit 3/8″ Carriage #9280 (6 Count)
Six Galvanized Carriage Bolts Nuts and Washers 3/8″ x 2.5″
Dock Hinge Bolt with Nylock Nut Zinc (8 Pack) #9092
This bolt and nut is used to join floating dock sections. Tighten them up all the way into the nylock portion of the nut. To prevent noise, do not tighten the hinge plates together. (8 Per Pack)
Dock Hinge Nylon Spacer (12 Pack) #2558P
Nylon Spacer to help absorb sound between hinge plates. (12 Per Pack)
1.5″ Schedule 40 Galvanized Pipe (Curbside Pickup Only)
The actual measurement from outside edges is 1-7/8″ or 1.9.” However, it is known as “inch and a half schedule 40 Galvanized Pipe”. This is available at most hardware and plumbing stores. We additionally offer it for curbside pickup at … Read More
Post Guide Long #6090
Long Post Guide: Allows water level more fluctuation than the regular post guide. As water level changes, the distance to and from shore changes. Use 1.5″ schedule 40 Galvanized Pipe driven through the opening. When water is high, pipe would go … Read More
Reinforced Hinge Plate #6010
1/4″ Galvanized Steel
4″ Tall
10″ Long
Tab is 4 3/8″
Reviews
There are no reviews yet.