$115.00
10″x24″x36″ Air Filled Drag On Float
Skid Board attachment optional with the use of long carriage bolts up through openings in the float.
A threaded vent hole is installed for floats that ship to high altitudes to prevent expanding. Plug will need to be installed before use.
For orders of 6 or more, you may want to call for a bulk shipping rate. Pallet shipping needs to go to a commercial location with a fork lift or loading dock unless you pay extra for a delivery truck with a lift gate. Shipping locations need to be trailer truck accessible. (no camp roads)
Otherwise, UPS ground is the best shipping method for these items.
Buoyancy 300 lbs
10″x24″x36″ Air Filled Drag On Float
Skid Board attachment optional with the use of long carriage bolts up through openings in the float.
A threaded vent hole is installed for floats that ship to high altitudes to prevent expanding. Plug will need to be installed before use.
3/16″ wall thickness.
5 Year warranty against factory defects.
Floats have been known to last over 30 years.
This clip shows floats being used to position dock sections.
| Weight | 21 lbs |
|---|---|
| Dimensions | 36 × 24 × 10 in |
Only logged in customers who have purchased this product may leave a review.
This is used to provide a flat surface to pound a 4×4 into the ground with a sledge hammer. The 4×4 should be pointed on the bottom. 1″ thick Steel on top and 3/16″ wall thickness on the sleeve. This … Read More
10″x24″x48″ Air Filled Drag On Float
Skid Board attachment optional with the use of long carriage bolts up through openings in the float.
A threaded vent hole is installed for floats that ship to high altitudes to prevent expanding. The plug needs to be installed before use.
For orders of 6 or more, you may want to call for a bulk shipping rate. Pallet shipping needs to go to a commercial location with a fork lift or loading dock unless you pay extra for a delivery truck with a lift gate. Shipping locations need to be trailer truck accessible. (no camp roads)
Otherwise, UPS ground is the best shipping method for these items.
Rotation Molded Polyethylene Dock Floatation with Expanded Poly Styrene Foam Filling.
Buoyancy 327 lb in Fresh water
A vent plug is included and needs to be installed before use.
For orders of 6 or more, you may want to call for a bulk shipping rate. Pallet shipping needs to go to a commercial location with a fork lift or loading dock unless you pay extra for a delivery truck with a lift gate. Shipping locations need to be trailer truck accessible. (no camp roads)
Otherwise, UPS ground is the best shipping method for these items.
Corner Iron reinforces the inside corner of the dock frame. Mostly needed on a section that is resting on the J-Brackets for stationary docks or to reinforce corners and stringers on floating docks that are under a lot of torque due … Read More
This plate is used when a floating dock is connected into the side of another where there is no corner. This plate mounts to the side of the dock and the outer corners where the stringer ends needs to be … Read More
Reviews
There are no reviews yet.