Description
Painted Steel handle for lifting dock frames. This handle puts the weight at your sides instead of out in front. The handle helps prevent splinters, back injury and pinching of fingers, knees and toes.
Additional information
| Weight | 2 lbs |
|---|---|
| Dimensions | 10 × 4 × 4 in |
Only logged in customers who have purchased this product may leave a review.
Related Products
Jack Pole Extension #4000
For Installing Stationary Dock Sections with the leveling winch and pipe foot.
Marine Grade Aluminum with four stainless set screws.
Pipe Puller #4154
Fits on 1.5″ schedule 40 Pipe. Great for twisting pipe to get it out of the ground if stuck. This is also used to screw in the pipe that has an auger on the end. Works Great with our Dock … Read More
Super Driving Cap #7100
Use this to provide a flat surface for pounding the dock legs in with a sledge hammer. This is a wear part and expected to wear out after long use. The cap absorbs the blow from a sledge hammer … Read More
Dock Float 10″x24″x48″ Air Filled “Drag On Float” #2302
10″x24″x48″ Air Filled Drag On Float
Skid Board attachment optional with the use of long carriage bolts up through openings in the float.
A threaded vent hole is installed for floats that ship to high altitudes to prevent expanding. The plug needs to be installed before use.
For orders of 6 or more, you may want to call for a bulk shipping rate. Pallet shipping needs to go to a commercial location with a fork lift or loading dock unless you pay extra for a delivery truck with a lift gate. Shipping locations need to be trailer truck accessible. (no camp roads)
Otherwise, UPS ground is the best shipping method for these items.
Pipe Foot (2 Pack) #4180
Dock Pipe Leg Foot with a set screw for vertical adjustment. Pipe can pass through the foot into the ground while the foot prevents the leg from pushing deeper when weight is added. Dock feet are not always needed on rocky lake bottoms but more commonly used on mud and sand. Foot plate size is 9.5″ x 9.5″
4×4 Post Driving Cap #7101
This is used to provide a flat surface to pound a 4×4 into the ground with a sledge hammer. The 4×4 should be pointed on the bottom. 1″ thick Steel on top and 3/16″ wall thickness on the sleeve. This … Read More
Reviews
There are no reviews yet.