Description
Helix Anchor “Hot Dip Galvanized”
Install by hand, removable anchor, reusable anchor
Strength depends on soil.
1″ Eye at top with a welded closed loop.
4″ Disc
Helix Anchor #2199
$50.50
Helix anchor
Additional information
| Weight | 5 lbs |
|---|---|
| Dimensions | 40 × 12 × 5 in |
Only logged in customers who have purchased this product may leave a review.
Related Products
Shore Anchor Bracket #6014
Fits 1.5″ schedule 40 Pipe
Galvanized Steel with a set screw included
DIY Anchor Rod Galvanized for Concrete Block #6029
You can buy our ready-made concrete anchors at our location in Naples, Maine, or you may have them shipped on a trailer truck with your entire dock. However, shipping fully-set anchors alone is very costly. The good news is you … Read More
Float Air Filled Dock Floatation (Drag-On Float)
Air Filled Drag On Float
Skid Board attachment optional with the use of long carriage bolts up through openings in the float.
A threaded vent hole is installed for floats that ship to high altitudes to prevent expanding. The plug needs to be installed before use.
Contact us for a freight quote on this item.
Torsion Bar End Socket #4155
In a marina, you have boat slips. The docks between boats are called finger docks. These dock sections are often very twisty at the end. If they are made out of wood, the boards flex enough they feel tipsy. The … Read More
Corner Iron 90º #6027A
Corner Iron reinforces the inside corner of the dock frame. Mostly needed on a section that is resting on the J-Brackets for stationary docks or to reinforce corners and stringers on floating docks that are under a lot of torque due … Read More
Post Guide #6097
The “post guide” is used to go around a pipe that is driven next to the floating dock. This bolts to the frame and helps hold it in position.
Dock Float Attachment Kit (6 Lags for Perma Floats) #9278-6
Use these lags to attach the foam filled floats to a wood frame dock. Use the large washers against the plastic flange.
1.5″ Schedule 40 Galvanized Pipe (Curbside Pickup Only)
The actual measurement from outside edges is 1-7/8″ or 1.9.” However, it is known as “inch and a half schedule 40 Galvanized Pipe”. This is available at most hardware and plumbing stores. We additionally offer it for curbside pickup at … Read More
Reviews
There are no reviews yet.