4×4 Post Bracket #9069A
Marine Grade Aluminum
10″ Long
4.5″ Tall
Holes are 3/4″ in from edge & 2 3/4″ from base
Requires 3/8″ Carriage Bolts for mounting
J Bracket Connector #9067 (2 Pack)
Connect stationary dock sections with these brackets. The Bolt provided is to clamp the resting section on the J Bracket. The diagonal shaped bolt holes allow height adjustment up to one inch between sections as some lumber varies in size. … Read More
2×4 Rail Post Clamp (4 pack) #4051
Marine grade aluminum
Requires two 3/8 bolts
4×4 Post Foot #4069F
This is a foot that mounts to the lower end of a 4×4 post leg. The post can be pointed on the base and pounded into the ground until the plate meets the surface.
Bolt Kit 3/8″ Carriage #9280 (6 Count)
Six Galvanized Carriage Bolts Nuts and Washers 3/8″ x 2.5″
Corner Iron 90º #6027A
Corner Iron reinforces the inside corner of the dock frame. Mostly needed on a section that is resting on the J-Brackets for stationary docks or to reinforce corners and stringers on floating docks that are under a lot of torque due … Read More
