Description
Post bracket bolts to the side of the dock frame and allows height adjustments on 4×4 post legs.
Useful on Nature trail bridges and Docks. Watch the videos below to see this part in use.
Additional information
| Weight | 4 lbs |
|---|---|
| Dimensions | 12 × 7 × 5 in |
Only logged in customers who have purchased this product may leave a review.
Related Products
Center Bolt Kit (4 Pack) #9091
Center Bolt kit is used to secure a dock section on the J-Brackets. Drill a hole straight through the end of both sections between the J-Brackets and insert this bolt. This will keep the dock section from lifting off the … Read More
4×4 Post Foot #4069F
This is a foot that mounts to the lower end of a 4×4 post leg. The post can be pointed on the base and pounded into the ground until the plate meets the surface.
Corner Iron 90º #6027A
Corner Iron reinforces the inside corner of the dock frame. Mostly needed on a section that is resting on the J-Brackets for stationary docks or to reinforce corners and stringers on floating docks that are under a lot of torque due … Read More
J Bracket Connector Pair Left & Right #9067
Galvanized Steel
The kit requires six 3/8″ carriage bolts. (bolt kit #9280)
4×4 Post Driving Cap #7101
This is used to provide a flat surface to pound a 4×4 into the ground with a sledge hammer. The 4×4 should be pointed on the bottom. 1″ thick Steel on top and 3/16″ wall thickness on the sleeve. This … Read More
J Bracket Surface Mount 2 PACK #4068A
The Surface Mount J Bracket bolts to the surface of the edge and provides a hook to rest the wood frame. Center bolts to secure the supported frame down are required.
Reviews
There are no reviews yet.