Folding Cleat #2275

Description

Folding Cleat (Black)

• The Cleat is not exposed when not in use
• The side of the cleat are angled to prevent toe stubbing and tripping
• Nylon Composite is rated for 27,000 pounds per square inch tensile strength
• Will not corrode in salt air, UV stabilized-heat deflection to 400º Farenheit

Great Northern Docks offers galvanized cleats and folding cleats for DIY dock builders.

Folding cleats should be mounted under permanent decking with a backer board. If decking on your dock is removable, the portion supporting the cleat must be adequately screwed or bolted down.

For wood frame docks, we recommend the use of through bolts and a stiffener (pictured above). Stiffeners will tie the tugging forces into the frame of the dock instead of potentially ripping off a deck board.

6? Cleats are not recommended for watercraft larger than kayaks, canoes, and rowboats, unless through bolts are used with a backer board to share the load over multiple deck boards.

Note: Lags or screws are not suggested for use on cleats except for kayaks, canoes and rowboats in protected areas.